Machine tools Sales : Service : Development : Modernisation
Factory: Bay 7 BSA Tools Ltd Mackadown Lane Birmingham B33 0LE. Contacts: Iain 07808 789597 Petr 07808 789598
We specialise in service support and refurbishing the Webster and Bennett Vertical Turning Centers that we designed and built between 1993 and 2010 – the Millennium, Evolution, Revelation and Aeroturn VTCs
The VTT-WB ManuPlus. The wonderful manual machines from the 1960/70’s can be modernised to produce to 2020 standards in a wide variety of specifications, less than 50% of the cost of an inferior built new machine
Our Webster & Bennett new build history equips us to offer these services with the qualities that made Britain a world leading machine tool designer and builder – before our industry was destroyed by governments
We can no longer build these machines new in the UK. That is a very sad story because the whole home grown UK machine tool industry was substantially destroyed in the 1980/90’s by government incompetence and ministerial lies.
There is a short introduction on this page, below the machine information.
Check out age-fit.com/govt/idiocy for the full story and see the danger that government ignorance has put us in.
DESIGNS FOR SALE We are looking for partners to manufacture these machines. The Millennium and Revelation require a large machine tool designer and builder. The Aeroturn was designed to be built easily by a small company. The Evolution and ManuPlus are perfect for a small company located in one of the countries where there are many existing Webster & Bennett installations
***** 5 star machine tool service*****
We specialize in supporting and modernising the Webster and Bennett Vertical turning centers that we originally designed and built between 1993 and 2010. We can support most machine tools
Contact us for any machine tool support of all quality CNC machines
THE MILLENNIUM
A range of vertical turning centres. These were purchased by world leading companies because of their innovations and high quality performance. A design that has proven to hold its world class performance. High speed, high power, super precision turning , contour milling and grinding.
Click on the photo to see film and photos of the Millennium in build and in action
THE EVOLUTION
machines are built using the wonderful over engineered basic structure of the W&B 36, 48 and 72 manual machines.
Result – a new machine for turning, grinding and PCD drilling – 12kw. Turning diameters to 2100mm
Click on the photo to see film and detail photos of The Evolution in build and in action
***** 5 star machine tool service*****
Since 2004 we have given older Webster and Bennett vertical borers a new life and a new 2020’s specification chosen from the range of ManuPlus specifications
Contact us for any machine tool support of all quality CNC machines
THE REVELATION.
A range of super heavy vertical turning centres for turning, grinding and contour milling. Capacities up to 5000mm dia.
Very innovative tooling developments and robot loading
Click the photo to see film and photos of the machines we built
***** 5 star machine tool service*****
Machine tool rebuilding since 1961
Webster & Bennett vertical turning specialization since 1986
We can provide high quality service support for all quality machine tools. Take a look at our history brochures
The Aeroturn CNC vertical turning centre
The last range of machines we built new in 2010.
Designed to offer a lighter duty machine than the Millennium. Even with linear guideways it proved to be a very powerful machine for precision turning, milling and grinding
Click the photo to see film and photos of the machines we built
We can provide high quality service support for all quality machine tools. Take a look at our history brochures
Contact us for any machine tool support
Iain Exeter +44 (0) 7808789597 iain@vtt-wb.com Petr +44 (0) 7808789698 peter@vtt-wb.com
MANUFACTURING PARTNERS SOUGHT FOR ALL THESE MACHINES.
We can no longer produce them in the UK We can support sales and commissioning, especially in English speaking countries We also communicate well in French, German, Italian, Czech, Russian, Bulgarian The designs can be purchased or contracted under license We are flexible and ready to hear your proposals Price and conditions are unlikely to be a problem.
We specialise in service support and refurbishing the Webster and Bennett Vertical Turning Centers that we designed and built between 1993 and 2010 – the Millennium, Evolution, Revelation and Aeroturn VTCs
The VTT-WB ManuPlus. The wonderful manual machines from the 1960/70’s can be modernised to produce to 2020 standards in a wide variety of specifications, less than 50% of the cost of an inferior built new machine
Our Webster & Bennett new build history equips us to offer these services with the qualities that made Britain a world leading machine tool designer and builder – before our industry was destroyed by governments
OPPORTUNITIES TO BUY WEBSTER & BENNETT MILLENNIUM MACHINES.
World class performance at normal price. Fully supported by the people who built them
3E125/150 Refurb in process
Webster & Bennett Millennium 3E-125/150 VTC + Siemens 840D CNC 3 axis vertical turning+ machining centre.
The 3E-125/150 VTC are truly world class machines for turning, rotary contour milling, drilling and grinding with high precision and high metal removal when required. Designed for high speed with low noise.
We are the people who designed and built these machines. On offer is a machine that has been used only on high precision light aero engine work. It has two 18 pocket tool magazines allowing in cycle pick up of up to 36 turning tools, milling tools and attachments. The machine condition is so good that with our total service and refurb process this machine is with 12 months warranty of 96% uptime original new machine tolerances + full PMP service at 6 months and 12 months, only cost being travel and accommodation
PRICE £295,000 ex works Birmingham but including installation and commissioning in your works subject to the extra costs of travel and accommodation. If required we can organize transport, rigging/lifting.
Webster & Bennett Millennium 3E 175/210 VTL + Fanuc 18Ti CNC 2 axis vertical turning lathe.
2 axis ultra high speed CNC turning with high accuracy and high metal removal. High speed comes quietly on a Millennium!
Machine available from existing users factory.
Can be viewed and tested by arrangement
To be sold at a SPECIAL PRICE - as seen ex users factory £140,000, including dismantling and loading to transport
Transport, installation, commissioning and ongoing maintenance management and support is available from VTT-WB – the Millennium experts
This film shows the first Millennium we refurbished 6 years ago. It is a 3E-125/150 VTC, a sister to the smaller Millennium currently being refurbished. The first machine continues to turn and machine extremely precise and important defence components
The Millennium CNC from 1996
A design that has proven to hold its world class performance. High speed, high power, super precision turning , contour milling and grinding. Capacities to 2300mm
The Evolution CNC from 2004
Evolution machines are built using the wonderful over engineered basic structure of the W&B 36, 48 and 72 manual machines. Result – a new machine for turning, grinding and PCD drilling – 12kw! Turning diameters to 2100mm
The Revelation CNC from 2006
A super heavy cutting machine for turning, grinding and contour milling. Capacities up to 5000mm dia.
The Aeroturn CNC from 2009
A faster, lighter duty , but still powerful!, Turning, milling and grinding
Manu Plus modernisation from 2004
Convert your faithful manual machine, even back to 1960, into a new specification for the 2020’s
Our Model Range
THE MILLENNIUM
A range of vertical turning centres. These were purchased by world leading companies because of their innovations and high quality performance. A design that has proven to hold its world class performance. High speed, high power, super precision turning , contour milling and grinding.
Click on the photo to see film and photos of the Millennium in build and in action
***** 5 star machine tool service*****
We specialize in supporting and modernising the Webster and Bennett Vertical turning centers that we originally designed and built between 1993 and 2010. We can support most machine tools
Contact us for any machine tool support of all quality CNC machines
THE EVOLUTION
machines are built using the wonderful over engineered basic structure of the W&B 36, 48 and 72 manual machines.
Result – a new machine for turning, grinding and PCD drilling – 12kw. Turning diameters to 2100mm
Click on the photo to see film and detail photos of The Evolution in build and in action
***** 5 star machine tool service*****
Since 2004 we have given older Webster and Bennett vertical borers a new life and a new 2020’s specification chosen from the range of ManuPlus specifications
Contact us for any machine tool support of all quality CNC machines.
THE REVELATION.
A range of super heavy vertical turning centres for turning, grinding and contour milling. Capacities up to 5000mm dia.
Very innovative tooling developments and robot loading
Click the photo to see film and photos of the machines we built
***** 5 star machine tool service*****
Machine tool rebuilding since 1961
Webster & Bennett vertical turning specialization since 1986
We can provide high quality service support for all quality machine tools. Take a look at our history brochures
The Aeroturn CNC vertical turning centre
The last range of machines we built new in 2010.
Designed to offer a lighter duty machine than the Millennium. Even with linear guideways it proved to be a very powerful machine for precision turning, milling and grinding
Click the photo to see film and photos of the machines we built
We can provide high quality service support for all quality machine tools. Take a look at our history brochures
Contact us for any machine tool support
Iain Exeter +44 (0) 7808789597 iain@vtt-wb.com Petr +44 (0) 7808789698 peter@vtt-wb.com
ManuPlus – a major machine tool recycling program 15 to 50 tons of recycling in one hit
That is Green!
Webster & Bennett the best known vertical boring machines in the world since
VTT-WB – specialists with the history to service, upgrade and modernize these great machines
VTT-WB – updating with qualities that made Britain a world leading machine tool designer/builder
VTT-WB ManuPlus program giving 50+ year old W&B machines a new outstanding 2020’s capability